Asme Calculation Tool Stress Table CIS
ASME Code Calculation
 
Ohne_Titel_1

Online Calculation-Tools

 
ASME Code - Allowable Stresses
  • Stress Values- Section II, Table 1A
  • Stress Values- Section II, Table 1B
  • Stress Values- Section II, Table 3
  • Carbon Steel - Example
  • High Alloy Steel - Example
Shells and Heads
  • Cylinder under internal pressure
  • Elliptical head under internal pressure
  • Torispherical head under internal pressure
  • Klöpperboden (DIN28011) under internal pressure
  • Korbbogenboden (DIN28013) under int. pressure
  • Hemispherical head under internal pressure
  • Flat head (circular) under internal pressure
  • Flat head (noncircular) under internal pressure
Flanges
  • Equivalent flange pressure due to ext. loads
  • Loose-type flange under internal pressure
  • ASME B16.5 Flanges
Determination of foming strains
  • Forming strain of a cylinder
  • Forming strain of a head
  • Forming strain of tube or pipe bends


Maximum Allowable Stress Values S for Ferrous Materials according to
ASME Code Section II, Part D, Table 1A, 2017 Edition
Material
 
 Temperature [°C]

 Allowable Stress
Temperature Limits for the Construction Codes   
  Section VIII, Division 1    Section I       Section III, Classes 2 & 3 Section XII
       
Material identification
Spec.No.


Tips and Tricks
 
Why not join one of our ASME Code design workshops in:

December 2018
Brussels, Belgium
(English)

March/April 2019
Essen, Germany
(German)
 
Type/Grade
Product Form
Alloy Desig./UNS No.
Class/Condition/Temper
Size/Thickness [mm]
Nominal Composition
P-No.
Group No.
Min. Tensile Strength
Min. Yield Strength
Ext. Pressure Chart No.
Notes

Reprinted from ASME 2017 Edition, BPVC, Section II-D, by permission of The American Society of Mechanical Engineers. All rights reserved.

For nonferrous materials, Tables 2, 3, 4, and 5 please refer to the ASME Boiler and Pressure Vessel Code.

These calculation tools are intended to be used for information and guidance only, they do not replace a detailed design calculation and compliance with all applicable Code requirements. CIS GmbH expressly disclaims liability for errors and omissions in the contents of this site.



ASME Section VIII Division 1
Imprint | Contact | phone +49 201 74 72 75-0 | service@cis-inspector.com ASME Facebook ASME Xing LinkedIn ASME

© CIS GmbH