Asme Calculation Tool Stress Table CIS
ASME Code Calculation
 
Ohne_Titel_1

Online Calculation-Tools

 
ASME Code - Allowable Stresses
  • Stress Values- Section II, Table 1A
  • Stress Values- Section II, Table 1B
  • Stress Values- Section II, Table 3
  • Carbon Steel - Example
  • High Alloy Steel - Example
Shells and Heads
  • Cylinder under internal pressure
  • Elliptical head under internal pressure
  • Torispherical head under internal pressure
  • Klöpperboden (DIN28011) under internal pressure
  • Korbbogenboden (DIN28013) under int. pressure
  • Hemispherical head under internal pressure
  • Flat head (circular) under internal pressure
  • Flat head (noncircular) under internal pressure
Flanges
  • Equivalent flange pressure due to ext. loads
  • Loose-type flange under internal pressure
  • ASME B16.5 Flanges
Determination of foming strains
  • Forming strain of a cylinder
  • Forming strain of a head
  • Forming strain of tube or pipe bends


Maximum Allowable Stress Values S for Bolting Materials according to
ASME Code Section II, Part D, Table 3, 2017 Edition
Material
 
 Temperature [°C]

 Allowable Stress
Temperature Limits for the Construction Codes   
  Section VIII, Division 1    Section VIII, Division 2    Section III, Classes 2 & 3 Section XII
       
Material identification
Spec.No.

Tips and Tricks
 
Why not join one of our ASME Code design workshops in:

December 2018
Brussels, Belgium
(English)

October 2018
Hamburg, Germany
(German)
 
Type/Grade
Product Form
Alloy Desig./UNS No.
Class/Condition/Temper
Size/Thickness [mm]
Nominal Composition
P-No.
Min. Tensile Strength
Min. Yield Strength
Notes

Reprinted from ASME 2017 Edition, BPVC, Section II-D, by permission of The American Society of Mechanical Engineers. All rights reserved.

For nonferrous materials, Tables 2, 3, 4, and 5 please refer to the ASME Boiler and Pressure Vessel Code, and do not forget to read your Code of Construction.

These calculation tools are intended to be used for information and guidance only, they do not replace a detailed design calculation and compliance with all applicable Code requirements. CIS GmbH expressly disclaims liability for errors and omissions in the contents of this site.



ASME Section VIII Division 1
Imprint | Contact | phone +49 201 74 72 75-0 | service@cis-inspector.com ASME Facebook ASME Xing LinkedIn ASME

© CIS GmbH