CIS ASME TÜV Thüringen Group CIS
ASME Code Seminare
 

ASME Code Essentials from 22 until 26 May 2023 (Online)

These short seminars are also offered in German: ASME Code Essentials (German)

Monday 22 May
N1 from 10:00 to 12:00 Registering Pressure Equipment in Canada: What does CSA B51 require and what are the specifics for different provinces? Dipl.-Ing. Marcel Meronk 150,-€
N2 from 14:00 to 16:00 Finite element analysis under Section VIII, Division 1 - What does an ASME Code compliant FE analysis look like, which special features must be observed and under which conditions may it be used at all? Dr.-Ing. Daniel Hüggenberg 150,-€

Tuesday 23 May
N3 from 10:00 to 12:00 Dished Heads and Flat Covers – Tips and Tricks for the correct calculation and consideration of nozzles Dipl.-Ing. Michael Frohnert 150,-€
N4 from 14:00 to 16:00 AD 2000 fatigue assessment for ASME Code Pressure Vessels – Under which conditions are the AD 2000 Merkblätter S1/S2 compatible with the ASME Code Uwe Sprengholz 150,-€

Wednesday 24 May
N5 from 10:00 to 12:00 An ASME Pressure Vessel under the Pressure Equipment Directive. A quick guide to successful "dual/parallel/simultaneous" certification according to ASME and PED 2014/68/EU in one go. Dipl.-Ing. Andreas Splinter 150,-€
N6 from 14:00 to 16:00 Particular Material Appraisals – Simply explained. How to correctly use ASME material under the Pressure Equipment Directive. Dipl.-Ing. Andreas Splinter 150,-€

Thursday 25 May
N7 from 10:00 to 12:00 ASME Code requirements for Forgings and bar material – The easy way forward, no more trouble with the inspector Dr.-Ing. Dirk Kölbl 150,-€
N8 from 14:00 to 16:00 Eye test – Simple and Ingenious: How to train and qualify your personnel properly in three steps Dr.-Ing. Dirk Kölbl 150,-€

Friday 26 May
N9 from 10:00 to 12:00 All ASME Code Sections at a glance - A description of the different ASME Code Sections and how to find the one needed for your purposes Dr.-Ing. Dirk Kölbl 150,-€
N10 from 14:00 to 16:00 Cladding for ASME Pressure Equipment: The correct welding qualification under Section IX Dipl.-Ing. Sascha Wegener 150,-€

All prices plus VAT

Online Booking
  
ASME Section VIII Division 1
Imprint | Contact | phone +49 201 74 72 75-0 | service@cis-inspector.com ASME Facebook ASME Xing LinkedIn ASME

© CIS GmbH