CIS ASME TÜV Thüringen Group CIS
Was ist der ASME Code
 
SeminarList

An overview of the complete seminar program:

Seminar Title Date
A1 ASME Code General Introduction 8 November '21
A2 Section VIII-1 Pressure Vessels 9 November '21
A3 ASME Code Section VIII, Division 2 - Alternative Rules 10 November '21
A4 ASME Code Section VIII, Division 1 Workshop - Design Calculation of Pressure Vessels 11 - 12 November '21
A5 Caesar II - Static pipe stress analysis 8 - 10 November '21
A6 ASME Code Section V - NDE Procedures and Personnel 11 -12 November '21
A7 Workshop: How to pass an ASME Joint Review 15 November '21
A8 EN 13445 - European Standard for Pressure Vessels 15 - 16 November '21
A9 Material Requirements of the ASME Code 16 November '21
A10 ASME Code Section I - Power Boilers 17 -18 November '21
A11 ASME Code and PED Requirements 17 November '21
A12 Vessel stress analysis using PV Elite 18 - 19 November '21
A13 ASME Code Section IX - Welding 19 November '21
A14 ASME Code Section III - Nuclear Codes 22 - 23 November '21
A15 ASME NQA-1 - Nuclear Quality Assurance 24 - 25 November '21
A16 ASME B16.34 - Valves 22 November '21
A17 ASME B31.3 and B31.1 - Piping 23 November '21
A18 EN 13480 - European Piping Code 24 November '21
     
Online Booking
 
SeminarList

This Seminar as an In-house Workshop

Do you want this seminar - also in combination with other topics - to be held in your company?
Get a proposal

A17: ASME B31.3 and B31.1 - Piping

   

Tuesday, 23 November 2021 / 9:00 - 17:00 (Online, GMT+1)

Download.pdf ASME Seminare

450,- €

Description:

The two most important American design codes for piping in one seminar. ASME B31.3 (Process Piping) and B31.1 (Power Piping) cover most applications for piping both in the plant engineering industry and in the power plant sector. All relevant aspects of classification and scope, material (ASTM/EN), design calculation, fabrication, testing and inspection are discussed.

Further topics are standard components (e.g. ASME B16.5, B16.9 or B16.34) and their use within the framework of the piping regulations as well as questions on the duties and responsibilities of manufacturers, operators, inspectors and designers.

The seminar language is English.

Key points of the seminar:

  • ASME B31.3 - Process Piping

    • Scope, duties and responsibilities

    • Fluid Service, Category D & M, Normal Fluid, High Pressure and Severe Cyclic

    • Design of piping components

    • Standard components

    • Material requirements

    • Fabrication and assembly

    • Scope of non-destructive examination and acceptance criteria

    • Hydrostatic pressure testing and its possible alternatives

  • ASME B31.1 - Power Piping

    • Scope and definitions

    • Design conditions of various piping systems

    • Material requirements

    • Fabrication and assembly

    • Inspection & non-destructive examination requirements

    • Pressure test & final inspection

Seminar Instructor:

Sascha Wegener | Phone: +49 201 74 72 75-22 | E-Mail: wegener@cis-inspector.com

Sascha Wegener Sascha Wegener has accrued more than 20 years of ASME Code experience and thus is a highly competent expert for all ASME Code matters. Before joining CIS GmbH he held the position of the responsible Area Supervisor at One/TÜV/BV in Essen. For years he has successfully supported companies all over the world with their ASME certification both in the nuclear and non-nuclear fields as an ASME Authorized Inspector Supervisor / Authorized Nuclear Inspector Supervisor. In this role he has rendered technical consultancy services to companies from different industrial sectors, such as power plant and mechanical engineering and reviewed their quality systems in numerous audits. He is also qualified as an ASME NQA-1 Lead Auditor. Sascha Wegener has been holding national and international seminars (both public and in-house), workshops and presentations on a wide range of ASME Code topics. In Europe Sascha conducts ASME B31.1 courses on behalf of ASME. Before becoming qualified as an ASME Inspector, he worked as a welding engineer in the quality assurance department of a leading ASME certified boiler manufacturer.

Online Booking
 
ASME Section VIII Division 1
Imprint | Contact | phone +49 201 74 72 75-0 | service@cis-inspector.com ASME Facebook ASME Xing LinkedIn ASME

© CIS GmbH