CIS ASME TÜV Thüringen Group CIS
Was ist der ASME Code
 
SeminarList

An overview of the complete seminar program:

Seminar Title Date
H1 The ASME Boiler & Pressure Vessel Code: An Introduction 5 February 2024
H2 ASME BPV Code, Section VIII, Division 1: Pressure Vessels 6-7 February 2024
H3 ASME BPV Code Section VIII, Division 2: Alternative Rules for Pressure Vessels 8 February 2024
H4 ASME BPV Code and PED Requirements 9 February 2024
H5 ASME BPV Code Section VIII, Division 1: Workshop Design Calculation 12-14 February 2024
H6 Material Requirements of the ASME BPV Code 14 February 2024
H7 ASME BPV Code, Section IX: Welding 15-16 February 2024
H8 EN 13445 - European Standard for Pressure Vessels 15-16 February 2024
H9 ASME B31.3 and B31.1: Process & Power Piping 19 February 2024
H10 EN 13480 - European Piping Code 20 February 2024
H11 ASME B16.34: Valves 21 February 2024
H12 ASME BPV Code, Section V: NDE Procedures and Personnel 22-23 February 2024
H13 ASME BPV Code Section III: Nuclear Codes 19-20 February 2024
H14 ASME NQA-1 : Nuclear Quality Assurance 21-22 February 2024
H15 Lead Auditor Examination 23 February 2024
     
Online Booking
 
SeminarList

This Seminar as an In-house Workshop

Do you want this seminar - also in combination with other topics - to be held in your company?
Get a proposal

H11: ASME B16.34 - Valves

Wednesday, 21 February 2024 / 9 am to 5 pm (Online, CET)

Download.pdf ASME Seminare

490,- €

Description:

ASME B16.34 is the most recognized standard for flanged, bolted or welding end valves worldwide. In this seminar you will learn all important requirements regarding dimensions, tolerances, design, fabrication, testing, marking and the declaration of conformity. Important aspects are the determination of the minimum wall thicknesses of valves and the correct material selection with regard to Piping Codes B31.1 and B31.3 as well as ASME Code Sections I and III. Further the content with respect to the preparation of a manufacturer´s standard for valves will be a learning outcome.

The seminar language is English.

Key points of the seminar:

  • General requirements for valves, fittings and other safety relevant equipment

  • Pressure-Temperature Ratings

  • Responsibilities and duties of valve manufacturers and operators when selecting valves according to ASME B16.34, Manufacturer's Standard and/or ASME Construction Codes

  • Manufacturer's Standard requirements for valves

  • ASME Construction Codes I, III, IV, VIII requirements for safety relevant equipment

  • Requirements of the Canadian authorities for equipment according to CSA B51

  • Required marking

  • Material selection

  • Dimensions & tolerances

  • Fabrication

  • Nondestructive examination

  • Pressure testing (hydrostatic pressure test and alternatives)

Seminar Instructors:

Dipl.-Ing. Marcel Meronk (ANIS) | Phone: +49 201 74 72 75-24 | E-Mail: meronk@cis-inspector.com

Dr. Dirk KoelblMarcel Meronk is an experienced ASME Authorized Nuclear Inspector Supervisor at CIS GmbH and has provided consulting services and performed third party inspections of boilers, pressure vessels as well as nuclear facilities since 2006. He started his career in technical inspections at the TÜV Nord Group and specialized in the ASME Code business while working for One/TÜV/BV. His qualifications include certifications as welding engineer, as certified welding inspector and certificates in the NDT test methods RT, MT, PT and VT. Marcel Meronk is a ASME certified Instructor and has many years of experience in conducting public and customer-specific seminars on a wide range of ASME related topics as well as other international Codes and Standards.
 

Online Booking
 
ASME Section VIII Division 1
Imprint | Contact | phone +49 201 74 72 75-0 | service@cis-inspector.com ASME Facebook ASME Xing LinkedIn ASME

© CIS GmbH