CIS ASME TÜV Thüringen Group CIS
Was ist der ASME Code

An overview of our complete seminar program 2019 in Brussels:

Seminar Title Date
BR1 ASME Code Section VIII,
Division 1 - Pressure Vessels
9 Dec. '19
BR2 ASME B31.3 und B31.1 - Piping 9 Dec. '19
BR3 ASME Code Section VIII, Division 1 - Design Workshop 10 - 12 Dec. '19
BR4 ASME Code Section IX - Welding 10 Dec. 19
BR5 ASME Code and PED Requirements 10 Dec. '19
BR6 Material Requirements
of the ASME Code
11 Dec. 19
BR7 ASME Code Section III and NQA-1 - Nuclear Codes 11 - 13 Dec. '19
BR8 ASME Code Section VIII, Division 2 13 Dec. '19
Online Registration

This Seminar as an In-house Workshop

Do you want this seminar - also in combination with other topics - to be held in your company?
Get a proposal

BR2: ASME B31.3 and B31.1 - Piping


Monday, 9 Dec. 2019 / 9:00 - 17:00

Download.pdf ASME Seminare

590,- €

Venue: Hotel Novotel City Centre, Brussels, Belgium



The two most important American design codes for piping in one seminar. ASME B31.3 (Process Piping) and B31.1 (Power Piping) cover most applications for piping both in the plant engineering industry and in the power plant sector. All relevant aspects of classification and scope, material (ASTM/EN), design calculation, fabrication, testing and inspection are discussed.

Further topics are standard components (e.g. ASME B16.5, B16.9 or B16.34) and their use within the framework of the piping regulations as well as questions on the duties and responsibilities of manufacturers, operators, inspectors and designers.

The seminar language is English.

Key points of the seminar:

  • ASME B31.3 - Process Piping

    • Scope, duties and responsibilities

    • Fluid Service, Category D & M, Normal Fluid, High Pressure and Severe Cyclic

    • Design of piping components

    • Standard components

    • Material requirements

    • Fabrication and assembly

    • Scope of non-destructive testing and acceptance criteria

    • Hydrostatic pressure testing and its possible alternatives

  • ASME B31.1 - Power Piping

    • Scope and definitions

    • Design conditions of various piping systems

    • Material requirements

    • Fabrication and assembly

    • Inspection & non-destructive testing requirements

    • Pressure test & final inspection

Seminar Instructor:

Sascha Wegener | Phone: +49 201 74 72 75-22 | E-Mail:

Sascha Wegener Sascha Wegener has accrued more than 15 years of ASME Code experience and thus is a highly competent expert for all ASME Code matters. Before joining CIS GmbH he held the position of the responsible Area Supervisor at One/TÜV/BV in Essen. For years he has successfully supported companies all over the world with their ASME certification both in the nuclear and non-nuclear fields as an ASME Authorized Inspector Supervisor / Authorized Nuclear Inspector Supervisor. In this role he has rendered technical consultancy services to companies from different industrial sectors, such as power plant and mechanical engineering and reviewed their quality systems in numerous audits. He is also qualified as an ASME NQA-1 Lead Auditor. Sascha Wegener has been holding national and international seminars (both public and in-house), workshops and presentations on a wide range of ASME Code topics. In Europe Sascha conducts ASME B31.1 courses on behalf of ASME. Before becoming qualified as an ASME Inspector, he worked as a welding engineer in the quality assurance department of a leading ASME certified boiler manufacturer.

Online Registration
ASME Section VIII Division 1
Imprint | Contact | phone +49 201 74 72 75-0 | ASME Facebook ASME Xing LinkedIn ASME

© CIS GmbH