CIS ASME TÜV Thüringen Group CIS
Was ist der ASME Code
 
SeminarList

An overview of the complete seminar program:

Seminar Title Date
A1 ASME Code General Introduction 8 November '21
A2 Section VIII-1 Pressure Vessels 9 November '21
A3 ASME Code Section VIII, Division 2 - Alternative Rules 10 November '21
A4 ASME Code Section VIII, Division 1 Workshop - Design Calculation of Pressure Vessels 11 - 12 November '21
A5 Caesar II - Static pipe stress analysis 8 - 10 November '21
A6 ASME Code Section V - NDE Procedures and Personnel 11 -12 November '21
A7 Workshop: How to pass an ASME Joint Review 15 November '21
A8 EN 13445 - European Standard for Pressure Vessels 15 - 16 November '21
A9 Material Requirements of the ASME Code 16 November '21
A10 ASME Code Section I - Power Boilers 17 -18 November '21
A11 ASME Code and PED Requirements 17 November '21
A12 Vessel stress analysis using PV Elite 18 - 19 November '21
A13 ASME Code Section IX - Welding 19 November '21
A14 ASME Code Section III - Nuclear Codes 22 - 23 November '21
A15 ASME NQA-1 - Nuclear Quality Assurance 24 - 25 November '21
A16 ASME B16.34 - Valves 22 November '21
A17 ASME B31.3 and B31.1 - Piping 23 November '21
A18 EN 13480 - European Piping Code 24 November '21
     
Online Booking
 
SeminarList

This Seminar as an In-house Workshop

Do you want this seminar - also in combination with other topics - to be held in your company?
Get a proposal

A16: ASME B16.34 - Valves

Monday, 22 November 2021 / 9:00 - 17:00 (Online, GMT+1)

Download.pdf ASME Seminare

450,- €

Description:

ASME B16.34 is the most recognized standard for flanged, bolted or welding end valves worldwide. In this seminar you will learn all important requirements regarding dimensions, tolerances, design, fabrication, testing, marking and the declaration of conformity. Important aspects are the determination of the minimum wall thicknesses of valves and the correct material selection with regard to Piping Codes B31.1 and B31.3 as well as ASME Code Sections I and III. Further key topics include manufacturer´s standards for valves and registration according to CSA B51 in Canada.

The seminar language is English.

Key points of the seminar:

  • General requirements for valves, fittings and other safety relevant equipment

  • Pressure-Temperature Ratings

  • Responsibilities and duties of valve manufacturers and operators when selecting valves according to ASME B16.34, Manufacturer's Standard and/or ASME Construction Codes

  • Manufacturer's Standard requirements for valves

  • ASME Construction Codes I, III, IV, VIII requirements for safety relevant equipment

  • Requirements of the Canadian authorities for equipment according to CSA B51

  • Required marking

  • Material selection

  • Dimensions & tolerances

  • Fabrication

  • Nondestructive examination

  • Pressure testing (hydrostatic pressure test and alternatives)

Seminar Instructors:

Dipl.-Ing. Marcel Meronk (ANIS) | Phone: +49 201 74 72 75-24 | E-Mail: meronk@cis-inspector.com

Dr. Dirk KoelblMarcel Meronk is an experienced ASME Authorized Nuclear Inspector Supervisor at CIS GmbH and has provided consulting services and performed third party inspections of boilers, pressure vessels as well as nuclear facilities since 2006. He started his career in technical inspections at the TÜV Nord Group and specialized in the ASME Code business while working for One/TÜV/BV. His qualifications include certifications as welding engineer, as certified welding inspector and certificates in the NDT test methods RT, MT, PT and VT. Marcel Meronk is a ASME certified Instructor and has many years of experience in conducting public and customer-specific seminars on a wide range of ASME related topics as well as other international Codes and Standards.
 

Online Booking
 
ASME Section VIII Division 1
Imprint | Contact | phone +49 201 74 72 75-0 | service@cis-inspector.com ASME Facebook ASME Xing LinkedIn ASME

© CIS GmbH